Tesla Model S/X LDU Replacement Cost: When Is Repair an Option?

Gear with an orange bearing ring icon for the article on Tesla Model S and X LDU replacement cost and repair options

Replacing the Large Drive Unit (LDU) in a Tesla Model S or Model X can be expensive, especially once labour and VAT are added to the unit price. Before choosing replacement, it is worth checking whether the original unit can be repaired and what work it needs.

Worn bearings may be replaced as part of a rebuild, while coolant entering the motor can cause electrical damage that needs further repair. A used Model S LDU can cost €5,750 excluding VAT and installation, while repair packages in the Netherlands and Germany are offered at €3,250–€4,250 including VAT. The final bill depends on the fault, the parts required and the work included, so these figures need to be compared on the same basis.

How much does a replacement LDU cost?

At the time of writing (November 2026), a used Model S large rear drive unit was advertised at €5,750 excluding VAT, with removal and installation extra. Before ordering, the workshop needs to confirm that the unit fits the car and check its condition and warranty. This is not an installed price, and it does not cover Model X or a new unit supplied by Tesla.

What makes up the full replacement bill?

The next step is to add the work needed to get the car back on the road. A workshop quote should say whether diagnosis, removal, installation, fluids, final checks and any transport are included. VAT also needs to be included in both totals before a replacement price is compared with a repair quote.

The warranty should also say who pays to remove and refit the unit if a claim is accepted. When giving a completion date, the workshop should confirm whether it includes waiting for the replacement to arrive.

When is repairing the original LDU worth considering?

Repair is worth discussing once the fault has been identified. If the noise comes from worn bearings, the workshop can assess whether replacing them will return the unit to service. Coolant inside the motor or inverter needs further investigation. If it has damaged the electrical insulation, new bearings and seals alone will not fix that damage. The repair must address the electrical fault as well, followed by testing.

Specialist workshops in the Netherlands advertise repair packages at €3,250 or €4,250 including VAT for the same listed work, with different warranty terms (prices checked November 2026). A German package costs €3,999 including VAT and covers removal and refitting. Oil is listed separately, and extra charges may apply depending on the unit’s condition.

If inspection shows that the stator or inverter also needs repair, that work needs to be priced before a decision is made. Replacement becomes an option when the damaged components cannot be suitably repaired, or when the total cost and warranty make it the better choice.

For an older Model S or Model X, other repairs due on the car also affect how much it makes sense to spend. A useful comparison shows which parts will be replaced, which will stay in service and what the warranty covers. That helps explain what the money buys with either option.

Which symptoms need investigation?

Before there is a repair quote, there is usually a noise, warning or loss of coolant to explain. Describing when it happens helps the workshop narrow down the cause:

  • Humming, whining or grinding. Worn drive unit bearings are one possible cause. A note of when the sound occurs and whether it changes with speed or load helps with diagnosis.
  • Coolant loss or a coolant warning. The workshop needs to trace the leak before blaming the LDU. Recording when the level falls and how much coolant has been added gives it useful background.
  • Drive-system warnings or reduced power. The exact message and the conditions in which it appeared are more useful than a general description. A photograph of the display can preserve that information.

A warning that says to stop or not to drive takes priority over arranging a routine inspection. High-voltage diagnosis and repair need trained technicians following the procedures for the vehicle.

Bearings and seals for LDU repairs

For motor bearing and seal repairs, the LDU Motor Rebuild Kit brings together two SKF hybrid ceramic rotor bearings, two primary-shaft bearings, a gearbox oil seal and output-shaft seals. The rotor coolant-seal option should be selected to match the planned repair.

When the repair also involves the reduction gearbox, the LDU Motor and Reduction Box Rebuild Kit includes additional bearings for the differential and countershaft. The choice between the two kits depends on which parts need replacing.

Smoothbev helps check parts compatibility by VIN before ordering. The VIN can be sent through chat or to customer support, together with any available drive unit identification, to help confirm the right kit and options. For help finding a repairer, the workshop directory lists EV repair providers.

Sources

Tesla and Mercedes-Benz are trademarks of their respective owners. Smoothbev is an independent parts supplier and is not affiliated with or endorsed by them.